IDL 800 Trainer Agilent 34970A & Variable Resistor Comparison Lab Report I want help rewording a lab report. I. Soldering
1.1
Tinning the soldering iron involves heating the soldering up, then taking some solder and
melting it onto the tip of the soldering iron.
1.2
Having a small amount of molten solder on the tip of the soldering tool helps transfer
heat to the components being soldered more rapidly as the liquid solder effectively
becomes a heat bridge. The tips of most soldering irons are iron plated copper. When
the iron is heated, it rapidly oxidizes when exposed to the air around it. A tip covered in
oxidation does a poor job transferring heat.
1.3
Placing the tip of the soldering tool in contact with the components to be soldered allows
the components themselves to reach the melting point of the solder which effectively
allows the solder to flow into the joint of the component. Allowing the solder to flow
into the joint and fill all the voids in the joint creates a very strong connection.
If we were to place the tip in contact with the solder itself, it would coat the tip and/or
eventually form into a bead and drip onto whatever was underneath it. If it happened to
drip on the component we wished to solder, it would likely only cover the surface of the
joint rather than filling in the voids and having a strong bond.
1.4
Flux is a chemical cleaning agent which helps take care of the issue of oxides when
joining metals together, which in our case is copper. First, the flux dissolves the oxides
that are already bound to the copper components. Second, it acts as a barrier between the
copper and the surrounding oxygen, which prevents new oxidation. The now clean
copper components are now ready for the solder, which readily flows into the joint of the
component, forming a strong bond.
1
II. The IDL-800 Trainer
2.1
Expected: +5VDC
?
Experimental: +5.08VDC
Expected: ±15VDC (Variable)
?
Experimental Maximum: +15.3VDC
?
Experimental Minimum: +0.15VDC
III. The Agilent 34970A
3.1
Theoretical
68,000 ? ±5%
100 ? ±5%
560 ? ±5%
510 ? ±5%
560,000 ? ±5%
Resistance Comparison
Experimental
% Difference
68,437 ?
-0.64%
99 ?
0.65%
556 ?
0.67%
514 ?
-0.81%
559,190 ?
0.14%
Acceptable?
Yes
Yes
Yes
Yes
Yes
3.2
Trial
+ to Ground
– to Ground
Voltage Comparison
Min
0.157 V
-0.130 V
3.3
Experimental Maximum: 108.9 kHz
Experimental Minimum: 10.5 Hz
3.4
Source = 60 Hz (Sine Wave)
Experimental Amplitude: 3.071 mV
2
Max
15.280 V
-15.330 V
IV. The Scope
4.1
Experimental Maximum: 15 V
Experimental Minimum: 0.13 V
4.2
Maximum
?
T = 10?s ? f = 1/T = 100 kHz
Minimum
?
T = 90ms ? f = 1/T = 11.1 Hz
4.3
Source = 60 Hz (Sine Wave)
Experimental Amplitude: 4 V
4.4
The oscilloscope displays the voltage graphically, showing you the oscillation of the sine
wave. Using this, we read the amplitude from the oscilloscope as peak to peak. The
Agilent gives a digital read out of the voltage, which is the RMS Voltage. Vrms is given
by 0.7071*Vpeak. Vpeak-to-peak is given by 2*Vpeak.
4.5
The oscilloscope gives you the big picture by means of visualization of everything at
once. You can visualize the frequency/period as well as the amplitude simultaneously.
You can get a rough reading of what these values are, but cant be precise. The agilent
allows precision readings in digital format, but thats all you get. You dont get a visual
readout.
V. Variable Resistors
Set #
5.1
5.2
5.3
Variable Resistor Comparison
Left/Middle
Middle/Right
35.7 ?
77.1 ?
47.5 ?
65.5 ?
60.4 ?
51.2 ?
3
Left/Right
106.0 ?
106.0 ?
106.0 ?
Purchase answer to see full
attachment
Why Choose Us
Top quality papers
We always make sure that writers follow all your instructions precisely. You can choose your academic level: high school, college/university or professional, and we will assign a writer who has a respective degree.
Professional academic writers
We have hired a team of professional writers experienced in academic and business writing. Most of them are native speakers and PhD holders able to take care of any assignment you need help with.
Free revisions
If you feel that we missed something, send the order for a free revision. You will have 10 days to send the order for revision after you receive the final paper. You can either do it on your own after signing in to your personal account or by contacting our support.
On-time delivery
All papers are always delivered on time. In case we need more time to master your paper, we may contact you regarding the deadline extension. In case you cannot provide us with more time, a 100% refund is guaranteed.
Original & confidential
We use several checkers to make sure that all papers you receive are plagiarism-free. Our editors carefully go through all in-text citations. We also promise full confidentiality in all our services.
24/7 Customer Support
Our support agents are available 24 hours a day 7 days a week and committed to providing you with the best customer experience. Get in touch whenever you need any assistance.
Try it now!
How it works?
Follow these simple steps to get your paper done
Place your order
Fill in the order form and provide all details of your assignment.
Proceed with the payment
Choose the payment system that suits you most.
Receive the final file
Once your paper is ready, we will email it to you.
Our Services
No need to work on your paper at night. Sleep tight, we will cover your back. We offer all kinds of writing services.
Essays
You are welcome to choose your academic level and the type of your paper. Our academic experts will gladly help you with essays, case studies, research papers and other assignments.
Admissions
Admission help & business writing
You can be positive that we will be here 24/7 to help you get accepted to the Master’s program at the TOP-universities or help you get a well-paid position.
Reviews
Editing your paper
Our academic writers and editors will help you submit a well-structured and organized paper just on time. We will ensure that your final paper is of the highest quality and absolutely free of mistakes.
Reviews
Revising your paper
Our academic writers and editors will help you with unlimited number of revisions in case you need any customization of your academic papers